ElecqApp GuideSupport

Elecq App Guide

Connect your charger and manage access from the Elecq app.

Log in to Elecq

  1. Open Elecq and select Log In. For a new account, select Sign Up.
  2. Enter your email address or phone number and password, or select Log In with Verification Code.
Elecq login screen with email or phone, password, and verification code options
Password and verification code options in Elecq.

Pair your first charger over Bluetooth

Start on the Site tab after signing in. Keep your phone near the charger with Bluetooth turned on, and have the charger PIN ready. The rings mark where to tap.

Create your site

  1. Start adding a charger

    On the Site tab, tap Add Charger.

    Start adding a charger. Tap targets: Add Charger
  2. Create your first site

    Tap Create Site to set up the location for your charger.

    Create your first site. Tap targets: Create Site

Configure your site

Choose a field to see its details. You can edit the four fields in any order.

Create a Site with four editable settings

Name

Enter a name you’ll recognize, then tap Save.

Name your site. Tap targets: Save name

Region

Open Region and select the country or region where the charger is installed.

Select your country or region. Tap targets: United Kingdom, example

Address

Open Address. Search for the installation address or use your current location if you’re at the site. Check the result and tap Save.

Set the installation address. Tap targets: Save address

Time Zone

Check the local time zone in the site summary. Tap Time Zone to change it if needed.

Check the time zone and save. Tap targets: Time Zone, Save site

When your site details are correct, tap Save on Create a Site to continue to Bluetooth scanning.

Find and bind your charger

  1. Wait for the Bluetooth scan

    Keep Bluetooth on and stay near the charger. Wait for your charger to appear in the scan results.

    Wait for the Bluetooth scan
  2. Select your charger

    Match the serial number in the scan results, tap View, then tap Add on the charger preview.

    Select your charger. Tap targets: Add device
  3. Enter the charger PIN

    Enter the PIN from the QR code sticker on the manual included in the box, then tap Add to verify and bind the charger.

    Enter the charger PIN. Tap targets: PIN field, Add after entering the PIN
  4. Confirm the charger was added

    Wait for Added successfully! before returning to your site.

    Confirm the charger was added
  5. Open the bound charger

    From your site, tap View on the charger card. Stay near the charger with Bluetooth enabled to use it over a local Bluetooth connection, even if the site view shows Offline.

    Open the bound charger. Tap targets: View charger

Connect your charger to Wi-Fi

After binding your charger, connect it to a Wi-Fi network with internet access. Stay near the charger with Bluetooth enabled during setup.

  1. Open your charger

    On the Site tab, tap My Charger to open the status card.

    Site screen with a chevron beside My Charger
  2. Open Wi-Fi settings

    Tap the gray Wi-Fi icon in the upper-left corner of the status card.

    Gray Wi-Fi icon with a small cross at the upper left
  3. Choose your Wi-Fi network

    Under Nearby Networks, tap your network name (Home Wi-Fi in this example). Enter its Wi-Fi password if prompted. If your network is missing, tap the refresh icon to scan again.

    Nearby Networks list with Home Wi-Fi as the example network
  4. Confirm the connection

    Look for a check mark beside your network under Connected Network. Tap the back arrow to return to the charger.

    Connected Network shows a check mark beside Home Wi-Fi
  5. Check the Wi-Fi icon

    The Wi-Fi icon in the upper-left corner is now dark.

    Charger status card with a dark Wi-Fi icon and Not plugged in below the charger

Start charging

Start from the app

Plug in your vehicle and tap Start from the Site tab or the My Charger panel.

  • Remote start. Use Start when your phone and charger are connected to the internet.
  • Local Bluetooth start. Use the same button when your phone is near the charger and connected to it via Bluetooth.
Site tab showing My Charger and its Start button
On the Site tab, tap Start on the charger card or tap My Charger to open the charger panel.
My Charger panel with the Start button
In the charger panel, tap Start.

Use an RFID card

Once the card is registered, plug in your vehicle and tap the card on the charger’s reader to start charging. Registered cards work even when the charger is offline.

  1. Open RFID Card

    In Access, select RFID Card, then tap Add.

    RFID Card setup screen with an Add button
  2. Choose how to register

    Tap Add via Charger to scan the card at the charger, or select Enter Card Number and follow the app prompts.

    Add RFID Card menu with two registration methods
  3. Start the countdown

    On the Add via Charger screen, tap Add when you have your card ready.

    Add via Charger screen with an Add button and a 20-second instruction
  4. Tap the card on the reader

    Present the RFID card to the charger’s reader within 20 seconds.

    Illustration showing where to present the card during the countdown

Use your phone as a Bluetooth key

  1. Open Access and select Phone Key

    From Site, open My Charger and tap Access. With Autostart off, tap Phone Key.

    Access menu with Autostart off and the Phone Key row highlighted
  2. Set up your phone

    Tap Set Up, follow the app prompts, and keep Bluetooth on.

    Phone Key setup screen with a Set Up button

When you approach with your configured phone, the charger plays a voice prompt in the language you’ve set. Plug in while the phone is nearby to start charging automatically.

Enable Autostart

In Access, turn on Autostart. Charging starts automatically whenever someone plugs in.

Autostart overrides scheduled starts. Anyone can start charging by plugging in.

Access screen showing the Autostart switch on

Charging speed

From Site, open My Charger and tap Speed. Choose a fixed current limit or set different limits for different times of day.

Fixed speed limit

open speed
With Schedule off, tap Max User Current to choose a fixed limit.

Schedule current limits

Turn on Schedule and tap Add to set a current limit for a time period. Choose every day or specific days of the week under Repeat.

Speed screen with Schedule switched off
Turn on Schedule, then tap Add.

Set the days, times and current limit

Tap a highlighted field to see its options. Set Start Time and Stop Time on the form. For an overnight period, check that the stop time shows Next Day.

Add Schedule form

Repeat

Select the days when the period starts, then tap OK.

Repeat

Max User Current

Choose the current limit for this period, then tap OK.

Max User Current

Tap Save, then check that the saved period is enabled.

Speed screen with the default current, weekly graph and enabled overnight period
The enabled period limits charging to 30 A from 20:00 to 06:00 every night. Tap Scheduled Default Max Current to choose the limit outside that period, shown here as 24 A.

Schedule charging

Choose the days and times you want to charge each week. If your vehicle is plugged in and ready to charge at the start time, the charger starts automatically and stops at the end of the period.

For scheduled charging to take effect, turn off Autostart under My Charger → Access. Autostart overrides the schedule.

  1. Open Schedule

    From Site, open My Charger and tap Schedule.

    Open Schedule
  2. Enable scheduled charging

    Turn on Schedule Charging.

    Enable scheduled charging
  3. Add a charging period

    Tap Add to set a weekly charging period.

    Add a charging period

Choose the days and times

Set Start Time and Stop Time in the charger’s time zone. For an overnight period, check that the stop time shows Next Day. Tap Repeat to see how to select the days.

Add Schedule with repeat days, start time and stop time

Repeat days

Select each day the period should start, then tap OK. Select all seven days to repeat daily.

Repeat days

Save and confirm the schedule

Tap Save on the form. On the Schedule screen, check that both Schedule Charging and the saved period are enabled. This example runs every night from 20:00 to 06:00 the next day.

Saved schedule

Share your charger with family

Before you send an invitation, ask your family member to register in the Elecq app with the email address you’ll invite.

Send the invitation

Open Account, tap Members, then choose Add Member. Enter your family member’s registered email address and tap Add.

Walkthrough from the Account tab through Members to the Add Member form

Accept the invitation

Your family member opens the invitation in their email inbox and accepts it within 24 hours. They can then return to the Elecq app and use the shared charger with that account.

Charging insights

1. Open Insights

On the Site tab, scroll to the bottom and tap Insights below My Charger. The card shows this month’s energy, costs and session count.

Site page with the Insights card below My Charger

2. Review and export charging sessions

The chart shows total energy for the selected period. Each session below it lists the date, energy and duration. Select a highlighted control to see its options.

Insights summary with the period selector and export icon

Choose a period

Select Week, Month or Year and tap OK. Use the arrows beside the date to move between periods.

Choose a period

Export sessions

Tap the export icon in the upper-right corner. Check the email address and tap Confirm to receive an Excel file with all charging sessions. Delivery can take a few minutes.

Export sessions

Remove a charger

Removing a charger erases personal data stored on it and removes it from your app. The charger can then be linked to another account.

RFID cards and phone keys still work after removal. To revoke them, open My Charger → Access and remove the cards or keys before unlinking the charger.

  1. Open the charger

    On the Site tab, tap My Charger.

    Open the charger
  2. Open Settings

    Tap the Settings gear in the lower-right corner of the charger panel.

    Open Settings
  3. Find Remove

    Scroll to the bottom of Advanced Settings. Tap the red Remove entry below Factory Reset.

    Find Remove
  4. Review the removal details

    Read the information on the Remove screen, then tap Remove to open the confirmation dialog.

    Review the removal details
  5. Confirm removal

    Tap Confirm to unlink the charger from your account. Tap Cancel to keep it linked.

    Confirm removal

Get help

If your charger is offline, check its network connection or try connecting via Bluetooth from nearby. If a family member already added the charger, ask them to invite you. For more troubleshooting, see the Elecq FAQ.